Test K: A Single Door Lock Is Inoperative
PINPOINT TEST K: A SINGLE DOOR LOCK IS INOPERATIVENormal Operation
When LOCK is pressed on a door lock control switch, voltage is supplied to the door lock actuators through circuit 117 (PK/BK). Ground for the door lock actuator is supplied through circuit 118 (PK/OG). When UNLOCK is pressed on a door lock control switch, voltage is supplied to the door lock actuators through circuit 118 (PK/OG). Ground for the door lock actuator is supplied through circuit 117 (PK/BK).
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Door latch
- Door lock actuator
- Sliding door contact switch
K1-K2:
K2-K4:
K4-K6:
K6 Continued:
