Upfitter Switch

Upfitter Switch









Removal and Installation

All vehicles

1. Remove the instrument panel center finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

Vehicles with trailer brakes

2. Using a suitable tool (such as a small screwdriver), press the retaining tab at the top and remove the Trailer Brake Control (TBC) module.

Vehicles without trailer brakes

3. Using a suitable tool (such as a small screwdriver), press the 4 retaining tabs and remove the storage bin.

All vehicles

4. Using a suitable tool (such as a small screwdriver), press the 4 retaining tabs and remove the upfitter switch.

5. To install, reverse the removal procedure.