Coolant Pump - Fuel Charging and Controls

Coolant Pump









Removal and Installation

1. Drain the fuel and turbocharger cooling system. For additional information, refer to Fuel and Turbocharger Cooling System Draining, Filling and Bleeding Service and Repair.

2. Remove the LH fender splash shield.

3. Disconnect the radiator-to-coolant pump hose at the coolant pump.

4. Disconnect the coolant pump-to-fuel cooler hose at the coolant pump.

5. Remove the 2 bolts and detach the coolant pump from the cooling module.
- To install, tighten to 3 Nm (27 lb-in).

6. Disconnect the coolant pump electrical connector and remove the coolant pump.

7. To install, reverse the removal procedure.
- Fill and bleed the fuel and turbocharger cooling system. For additional information, refer to Fuel and Turbocharger Cooling System Draining, Filling and Bleeding Service and Repair.