Console: Service and Repair

Floor Console

Floor Console Without Speaker Enclosure









Floor Console With Speaker Enclosure









Removal and Installation

Vehicles with a speaker enclosure

1. Remove the floor console storage tray mat and screw.

2. Remove the floor console front cup holder mat and screw.

3. Remove the LH and RH floor console push-pin retainers.

4. Remove the floor console front section.

All vehicles

5. Move the front seats to the full forward position.

6. Remove the floor console armrest.
- Remove the LH and RH floor console armrest bolt covers.

- Remove the LH and RH floor console armrest bolts.

- To install, tighten to 5 Nm (44 lb-in).

7. Remove the floor console rear screw.

8. Move the front seats to the full rearward position.

Vehicles without a speaker enclosure

9. Remove the beverage tray.





All vehicles

10. Remove the 2 floor console front screws.

11. Remove the floor console.
- If equipped, lift the rear of the speaker enclosure slightly upward.

12. To install, reverse the removal procedures.