Fan Shroud: Service and Repair

Cooling Fan Shroud - 4.0L





Removal and Installation

1. Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to Fuel Delivery and Air Induction.

2. Remove the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.

3. Using the Fan Pulley Holding Wrench and the Fan Clutch Nut Wrench, remove the fan and fan clutch assembly and position it inside the shroud.
- To install, tighten to 55 Nm (41 lb-ft).





4. Remove the 2 fan shroud bolts. Lift the fan and fan clutch assembly and the fan shroud together and remove from the vehicle.
- To install, tighten to 6 Nm (53 lb-in).

5. To install, reverse the removal procedure.