Radiator: Service and Repair

Radiator

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the cooling fan. For additional information, refer to Cooling Fan Service and Repair.

3. If equipped, remove the underbody splash shield.

4. NOTE: Typical shown, others similar.

Disconnect the transmission oil cooler hoses.

- Plug or cap the lines as needed.





5. Disconnect the lower radiator hose.

6. Remove the 4 bolts and the 2 radiator support brackets.
- To install, tighten to 20 Nm (177 lb-in).

7. Remove the radiator from the vehicle.

8. To install, reverse the removal procedure.