Safety Belt Inspection and Repair After A Collision

Safety Belt Inspection and Repair After a Collision

WARNING: All safety belt components must be inspected and corrected as part of any collision repair. Inspect all safety belt components as prescribed by Safety Belt Inspection and Repair After a Collision. Failure to follow this instruction may result in incorrect operation of the safety belt system and increase the risk of serious personal injury or death in a crash.

1. Before installing a new safety belt assembly, the safety belt attaching areas must be inspected for damage and distortion. If the attaching points are damaged and distorted, the sheet metal must be worked back to its original shape and structural integrity.
2. Install the new safety belt(s). For additional information, refer to the appropriate procedure. Carry out all applicable Functional Tests for the component(s). For additional information, refer to the appropriate Functional Test procedure in Safety Belt System.