Parking Brake Lever: Service and Repair

Removal Procedure

The C3500HD lever looks the same as the other models, but uses a different torque applying lever assembly.

1. Release the parking brake.
2. Lower the instrument panel section.
3. Disconnect the connector from the parking brake switch.
4. Disconnect the release cable (4).





5. Remove the release handle (2).
6. Remove the bolts.





7. Remove the lever assembly (1).


INSTALLATION PROCEDURE





1. Install the lever assembly (1).
2. Install the bolts (2).
^ Tighten the bolts to 24 Nm (18 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.






3. Install the release handle (2).
4. Connect the release cable.
5. Connect the connector to the parking brake switch.
6. Install the dash assembly.
7. Adjust the parking brake lever.