Battery Cable Replacement (Negative Cable to Frame)

Battery Cable Replacement (Negative Cable to Frame)

Removal Procedure




1. Disconnect the negative cable from the starter.
2. Disconnect the negative cable from the frame.

Installation Procedure




1. Connect the negative cable to the frame.
Clean the grounding area and coat it with a copper-impregnated ground sealer.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Connect the negative cable to the starter.

* Tighten the cable to the frame (7.2 L) nut to 28 Nm (21 lb ft).
* Tighten the cable to the starter (7.2 L) nut to 30 Nm (22 lb ft).