Rear Window Garnish Molding Replacement (Up-Level Trim)

Rear Window Garnish Molding Replacement (Up-Level Trim)

Removal Procedure

1. Remove the coat hooks and the screws from the side rear trim panels.
2. Remove the seat belt guide bolt.
3. Remove the seat belt guide.




4. Remove the rear window lower molding (1) by prying the rear window lower molding up and off the retainers.




5. Remove the 3 right and left side rear trim panel retaining screws.
6. Remove the right and left side rear trim panels (1).
7. Remove the dome lamp lens.
8. Remove the 2 dome lamp housing and bezel screws.
Remove the dome lamp housing and bezel.




9. Remove the 2 rear window upper molding retaining screws.
10. Remove the upper molding (1).

Installation Procedure





Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the rear window upper molding (1).

Tighten the 2 rear window upper molding screws to 2 Nm (18 lb in).

2. Install the dome lamp housing and bezel.

Tighten the 2 dome lamp housing and bezel screws to 2 Nm (18 lb in).

3. Install the dome lamp lens.




4. Install the right and left side rear trim panels (1) with 3 screws each.

Tighten the side rear trim panel screws to 2 Nm (18 lb in).

5. Install the seat belt guide.
6. Install the seat belt guide bolt.
7. Install the coat hooks and the coat hook screws.




8. Install the rear window lower molding (1).