Seat Belt Retractor Pretensioner Replacement - Front (Extended Cab)

Seat Belt Retractor Pretensioner Replacement - Front (Extended Cab)

Removal Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair) .




2. Open the belt upper guide shoulder bolt trim cover.
3. Remove the front seat belt upper guide shoulder bolt.
4. Remove the body rear corner trim panel. Refer to Body Side Rear Lower Trim Panel Replacement (Crew Cab) (Service and Repair)Body Side Rear Lower Trim Panel Replacement (Extended Cab) (Service and Repair)Body Side Rear Lower Trim Panel Replacement (Regular Cab) (Service and Repair) .
5. Remove the seat belt anchor bolt.
6. Disconnect the electrical connector from the retractor/pretensioner.
7. Remove the bolt that retains the seat belt retractor/pretensioner assembly to the body.
8. Remove the seat belt assembly from the vehicle.

Installation Procedure

1. Position the seat belt retractor/pretensioner assembly to the vehicle.





Notice: Refer to Fastener Notice.

2. Install the bolt which retains the seat belt retractor/pretensioner assembly to the body.

Tighten the seat belt retractor/pretensioner bolt to 52.5 N.m (39 lb ft).

3. Connect the electrical connector to the retractor/pretensioner.
4. Install the seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

Tighten the seat belt upper guide bolt to 52.5 N.m (39 lb ft).

5. Install the seat belt upper guide shoulder bolt trim cover.
6. Install the seat belt anchor bolt. Ensure that the seat belt webbing is not twisted.

Tighten the front seat belt anchor bolt to 52.5 N.m (39 lb ft).

7. Install the body rear corner trim panel. Refer to Body Side Rear Lower Trim Panel Replacement (Crew Cab) (Service and Repair)Body Side Rear Lower Trim Panel Replacement (Extended Cab) (Service and Repair)Body Side Rear Lower Trim Panel Replacement (Regular Cab) (Service and Repair) .
8. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair) .