Shift Lever Assembly Replacement (D06)

Shift Lever Assembly Replacement (D06)

Removal Procedure




1. Pull upward on the boot (1) in order to disengage the bezel retainers (2) from the console (3).




2. Remove the set screw (1) from the shift lever (2).
3. Remove the shift lever assembly from the control lever.

Installation Procedure




1. Install the shift lever assembly to the control lever, aligning the set screw threaded hole with the seat (3).
2. Apply threadlock GM P/N 12345493 (Canadian P/N 10953488) to the shift lever set screw threads.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the shift lever set screw.

Tighten the shift lever set screw to 25 N.m (18 lb ft).




4. Push downward on the bezel in order to engage the bezel retainers (2) with the console (3).