Operation CHARM: Car repair manuals for everyone.
Home >> GMC Truck >> 2009 >> Envoy 4WD V8-5.3L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Control Module HVAC >> Service and Repair >> HVAC - Automatic >> Blower Motor Control Processor Replacement

Blower Motor Control Processor Replacement




Blower Motor Control Processor Replacement

Removal Procedure

1. Remove the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Service and Repair).
2. Disconnect the electrical connector from the blower motor.




3. Disconnect the electrical connector (3) from the blower motor control processor (1).
4. Remove the blower motor control processor mounting screws (2).
5. Remove the blower motor control processor (1).

Installation Procedure




1. Install the blower motor control processor (1).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the blower motor control processor mounting screws (2) and tighten to 1.9 Nm (17 lb in).
3. Connect the electrical connector (3) to the blower motor control processor (1).
4. Connect the electrical connector to the blower motor.
5. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Service and Repair).

pro multis · About Operation CHARM