Differential Oil Replacement (10.5 Inch Axle)

Differential Oil Replacement (10.5 Inch Axle)

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .




2. Remove the fill plug (1).




3. Remove the rear axle drain plug (1).
4. Drain the lubricant into a suitable container.



Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution) .
1. Install the rear axle drain plug and tighten to 33 Nm (24 lb ft) .
2. Fill the rear axle with the proper fluid. Refer to Approximate Fluid Capacities andFluid and Lubricant Recommendations .




3. Install the fill plug and tighten to 33 Nm (24 lb ft).
4. Remove the support and lower the vehicle.