Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement (Battery Tray Replacement).
2. Remove the underhood electrical center.
3. Support the engine and transmission.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




5. Remove the front transmission mount to frame bolt (1).




6. Remove the rear transmission mount to rear transmission mount bracket bolt (1).
7. Lower the vehicle.




8. Remove the left transmission mount to transmission bolts (1).




9. Remove the left transmission mount to frame rail bolts (1).
10. Lower the transmission enough to provide clearance for the left transmission mount.
11. Remove the left transmission mount (2).

Installation Procedure




1. Install the left transmission mount (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the left transmission mount to frame rail bolts (1) and tighten to 27 Nm (20 lb ft).
3. Raise the transmission until the transmission contacts the left transmission mount.




4. Install the left transmission mount to transmission bolts (1) and tighten to 50 Nm (37 lb ft).
5. Raise the vehicle.




6. Install the rear transmission mount to rear transmission mount bracket bolt (1) and tighten to 110 Nm (81 lb ft).




7. Install the front transmission mount to frame bolt (1) and tighten to 110 Nm (81 lb ft).
8. Lower the vehicle.
9. Remove the engine and transmission support.
10. Install the battery tray. Refer to Battery Tray Replacement (Battery Tray Replacement).
11. Install the underhood electrical center.