Center Mounted Brake Lamp Bulb: Service and Repair

High Mount Stop Lamp Bulb Replacement

Removal Procedure




1. Remove the screws that retain the center high-mounted stop lamp (CHMSL) lens to the vehicle.
2. Remove the CHMSL from the vehicle.




3. Twist the lamp sockets (1) counterclockwise to remove.
4. Remove the bulbs from the sockets.

Installation Procedure




1. Install the CHMSL bulbs (1).




2. Install the CHMSL assembly to the vehicle. Ensure that the CHMSL gasket is seated properly.

Caution: Refer to Fastener Caution Fastener Caution.

3. Install the screws that retain the CHMSL lens to the vehicle.

Tighten the screws to 2.5 Nm (22 lb in).