Rear Wheel Speed Sensor Ring Replacement

Rear Wheel Speed Sensor Ring Replacement

Special Tools

* GE-8092 - Driver Handle

* J-2619-01 - Slide Hammer

* J-21128 - Axle Pinion Oil Seal Installer

* J-23690 - Bearing Installer

* J-45857 - Tone Wheel and/or Bearing Remover

* J-45860 - Tone Ring Installer

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Removal and Replacement.

3. Remove the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement Service and Repair.

4. Remove the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement (8.6, 9.5 Inch Axles) Rear Axle Housing Cover and Gasket Replacement (8.6, 9.5 Inch Axles)Rear Axle Housing Cover and Gasket Replacement (10.5 Inch Axle) Rear Axle Housing Cover and Gasket Replacement (10.5 Inch Axle).

5. Remove the axle shaft. Refer to Rear Axle Shaft Replacement Service and Repair.




6. Remove the axle shaft seal, the bearing and the wheel speed sensor ring from the axle housing using the J-45857 - tone wheel and/or bearing remover (1) and the J-2619-01 - slide hammer (2).

Installation Procedure




1. Install the wheel speed sensor ring using the J-45860 - tone ring installer (1) and the GE-8092 - driver handle (2).

2. Drive the wheel speed sensor ring into the axle housing until the tool bottoms against the tube.




3. Install the axle shaft bearing using the J-23690 - bearing installer (1) and the GE-8092 - driver handle (2).

4. Drive the axle shaft bearing into the axle housing until the tool bottoms against the tube.




5. Install the axle shaft seal using the J-21128 - axle pinion oil seal installer.

6. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.

7. Install the axle shaft. Refer to Rear Axle Shaft Replacement Service and Repair.

8. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement (8.6, 9.5 Inch Axles) Rear Axle Housing Cover and Gasket Replacement (8.6, 9.5 Inch Axles)Rear Axle Housing Cover and Gasket Replacement (10.5 Inch Axle) Rear Axle Housing Cover and Gasket Replacement (10.5 Inch Axle).

9. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement Service and Repair.

10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Removal and Replacement.

11. Fill the rear axle. Refer to Differential Oil Replacement (8.6 Inch Axle) Differential Oil Replacement (8.6 Inch Axle)Differential Oil Replacement (10.5 Inch Axle) Differential Oil Replacement (10.5 Inch Axle)Differential Oil Replacement (9.5LD Inch Axle) Differential Oil Replacement (9.5LD Inch Axle).

12. Lower the vehicle.