Front Upper Valve Body Assembly

INSTALL OR CONNECT
1. Secondary valve spring, throttle valve compensating ring(s), throttle valve, throttle valve primary spring and down shift plug to valve body; secure with one locating pin.
2. Cam return spring, cam spacer and TV cam to valve body; secure with one bolt.

Tighten
- TV cable cam bolt to 8 N.m (71 lb. in.).

3. Front valve end cover to valve body; secure with one bolt. Do Not Tighten bolt fully.





4. Secondary valve spring, secondary regulator valve to valve body. Rotate end cover over valve; secure with one remaining bolt.

Tighten
- Pressure relief valve bolts to 5 N.m (44 lb. in.).

5. Cut back valve spring, cut back valve and cut back plug to valve body; secure with one valve retainer.
6. Throttle valve keep plate to valve body.