Lower Valve Body Assembly

INSTALL OR CONNECT
1. Primary regulator valve, primary regulator valve spring, primary regulator valve plunger, primary regulator valve sleeve and primary regulator valve sleeve retainer into valve body.
2. TCC (lock-up) control valve spring, TCC (lock-up) control sleeve and locating pin into valve body.
3. Two intermediate coast modulator valves, intercoast modulator valve spring, low coast modulator valve spring, gasket, and shift solenoid assembly; secure with two bolts.

Tighten
- Shift solenoid assembly bolts to 10 N.m (89 lb. in.).

4. New O-ring to TCC solenoid. Lubricate with A/T Fluid.
5. TCC (lock-up) solenoid to valve body; secure with one bolt.
6. Pressure relief valve ball, pressure relief valve spring, pressure relief valve retainer secure; with one bolt.

Tighten
- TCC solenoid bolt to 5 N.m (44 lb. in.).

7. TCC (lock-up) control valve gasket and plate to valve body; secure with six bolts.

Tighten
- TCC control valve plate bolts to 5 N.m (44 lb. in.).

8. Lower valve body gasket and plate to valve body; secure with four bolts.

Tighten
- Lower valve body plate bolts to 5 N.m (44 lb. in.).





9. Ball valve spring, valve body ball, valve damping spring, check ball, bypass valve spring and bypass valve to valve body.