Operation CHARM: Car repair manuals for everyone.
Home >> Geo Truck >> 1997 >> Tracker 4x2 L4-1.6L VIN 6 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 03-72LE 4-Speed Automatic Transmission >> Repair Instructions >> Transmission Assembly >> Forward and Direct Clutch Assemblies

Forward and Direct Clutch Assemblies

INSTALL OR CONNECT

^ Tools Required:
- J 26900-5 Vernier Caliper
- J 36850 Transjel Transmission Assembly Lubricant

1. Direct clutch assembly to transmission case.





2. Apply J 36850 to thrust bearing and races and install in the following order. Race, thrust bearing and race to the forward clutch assembly.





3. Forward clutch assembly into transmission case using care not to drop thrust bearing and races from the forward clutch.





MEASURE
- MEASURE height difference between forward clutch input shaft and transmission case using a J 26900-5. Standard height difference is 3.0 mm (0.118-inch). If height difference is less than standard height difference, remove forward clutch assembly and reinstall.





4. Apply J 36850 to thrust bearing and race and install them to front of forward clutch.

pro multis · About Operation CHARM