Parking Lock Pawl and Manual Shift Linkage
INSTALL OR CONNECT1. Using a socket and hammer, install new manual shaft oil seals to both sides of the transmission case. Lubricate with A/T Fluid.
2. Manual shift shaft and shift lever to transmission case.
3. Manual shift lever pin to manual shift lever hub using a hammer.
4. Slide manual lever hub protection sleeve over the manual detent lever hub using a hammer and chisel.
5. Parking pawl rod to manual shift shaft.
6. Parking pawl, pivot pin and parking pawl torsion spring to transmission case.
7. Parking pawl plate to transmission case; secure with two bolts.
Tighten
- Parking pawl plate bolts to 7 N.m (62 lb. in.).