Rear Adapter Case and Vehicle Speed Sensor

INSTALL OR CONNECT

^ Tool Required:
- J 35538 Axle Shaft Seal Installer

1. Key way to output shaft.
2. Sensor ring to output shaft.
3. Using J 35538 install new oil seal to adapter case.





4. New gasket to adapter case arid adapter case to rear of transmission; secure with six bolts.

Tighten
- Adapter case bolts to 36 N.m (27 lb. ft.).

5. Apply A/T fluid to new O-ring and Oaring to speed sensor.
6. Speed sensor to adapter case; secure with one bolt.

Tighten
- Speed sensor bolt to 23 N.m (17 lb. ft.).