DTC 52

DTC 52: Motor Stuck OFF
1. Check the ABS MTR PUMP (40A) fuse in the auxiliary fuse box.
Is the fuse OK?
YES - Reinstall the fuse, and go to step 2.
NO - Replace the fuse, and recheck.
2. Disconnect the ABS control unit 31P connector.





3. Measure the voltage between the ABS control unit 31P connector terminal No. 17 and body ground.
Is there battery voltage?
YES - Go to step 4.
NO - Repair open in the wire between the ABS MTR PUMP (40A) fuse and the ABS control unit.





4. Check for continuity between the ABS control unit 31P connector terminal No. 16 and body ground.
Is there continuity?
YES - Check for loose terminals in the ABS control unit 31P connector. If necessary, substitute a known-good ABS modulator-control unit, and recheck.
NO - Repair open in the wire between the ABS control unit and body ground (G302).