C1660

DTC C1660 RECEIVER RF CIRCUIT FAIL

COMPONENT LOCATION
Refer to DTC C1126. C1126

GENERAL DESCRIPTION
Refer to DTC C1126. C1126

DTC DESCRIPTION
This DTC indicates that the RF receiver circuit fails. The most likely cause is a transmission obstacle.

DTC DETECTING CONDITION:

COMPONENT INSPECTION
1. Connect "TPMS exciter" or Scantool to Data Link Connector(DLC).
2. Clear DTC.
3. IG OFF & IG ON.
4. Execute "Diagnostic Trouble Codes(DTCs)" mode.
5. Is "C1660' present?
YES
- Check for vehicle interference sources.
- Repair if necessary and then go to "Verification of Vehicle Repair" procedure.
NO
- TPMS receiver complete successful Auto-location.
- System is OK.

VERIFICATION OF VEHICLE REPAIR
Refer to DTC C1121. C1121