B1330

DTC B1330
The detecting system for front crash consists of the SRSCM and two Front Impact Sensors (FIS). The SRSCM sets above DTC(s) if it detects wrong FIS is used.

DTC Detecting Condition:

DTC DETECTING CONDITION

Schematic Diagram:

SCHEMATIC DIAGRAM

TERMINAL & CONNECTOR INSPECTION
1. Visually inspect all connectors related to the affected circuit for damage and secure connection.
2. Inspect terminals for damage and corrosion.

CAUTION: Avoid damaging connectors during the inspection process.

3. Are any problems found?

NO - Go to next step (INSPECTION PROCEDURE).

YES - After repairing the trouble part, check whether DTC occurs or not.

INSPECTION PROCEDURE
If above DTC is detected replace the Front Impact Sensor.