B1416

DTC B1414 SIDE IMPACT SENSOR [FRONT-DRIVER] WRONG ID
DTC B1415 SIDE IMPACT SENSOR [FRONT-PASSENGER] WRONG ID
DTC B1416 SIDE IMPACT SENSOR [REAR-DRIVER] WRONG ID
DTC B1417 SIDE IMPACT SENSOR [REAR-PASSENGER] WRONG ID

DTC DESCRIPTION
The detecting system for side crash consists of the SRSCM and four Side Impact Sensors (SIS). The SRSCM sets above DTC(s) if it detects that wrong SIS is used.

DTC Detecting Condition:

TERMINAL & CONNECTOR INSPECTION
1. Visually inspect all connectors related to the affected circuit for damage and secure connection.
2. Inspect terminals for damage and corrosion.

CAUTION: Avoid damaging connectors during the inspection process.

3. Are any problems found?

YES - Go to next step (INSPECTION PROCEDURE).

NO - After repairing the trouble part, check whether DTC occurs or not.

INSPECTION PROCEDURE
If above DTC is detected replace the side impact sensor.