C1312
DTC C1312 SENSOR 1 RF FAILUREDTC C1313 SENSOR 2 RF FAILURE
DTC C1314 SENSOR 3 RF FAILURE
DTC C1315 SENSOR 4 RF FAILURE
COMPONENT LOCATION
Refer to DTC C1121. C1121
GENERAL DESCRIPTION
Refer to DTC C1121. C1121
DTC DESCRIPTION
This DTC indicates that the sensor has either failed to learn or has successfully learned and the receiver did not receive messages from the learned sensor for 9 minutes.
DTC DETECTING CONDITION
MONITOR SCANTOOL DATA
1. Connect 'TPMS exciter' or scan tool to Data Link Connector(DLC).
2. Select "TPMS DIAGNOSIS" mode.
3. Select the "FULL" mode of "TPMS DATA VALUES" function.
4. Monitor the parameters of 'Sensor1/Sensor2/Sensor3/Sensor4 (S1/S2/S3/S4)' on the 'TPMS exciter' or scan tool.
5. Are parameters normal?
YES
> Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet.
> Go to "Verification of vehicle Repair" procedure.
No
> Check for vehicle interference sources.
Repair if necessary and then go to "Verification of Vehicle Repair" procedure.
VERIFICATION OF VEHICLE REPAIR
Refer to DTC C1121. C1121