C1318

DTC C1317 SENSOR 1 WRONG TYPE INSTALL
DTC C1318 SENSOR 2 WRONG TYPE INSTALL
DTC C1319 SENSOR 3 WRONG TYPE INSTALL
DTC C1320 SENSOR 4 WRONG TYPE INSTALL

COMPONENT LOCATION
Refer to DTC C1121. C1121

GENERAL DESCRIPTION
Refer to DTC C1121. C1121

DTC DESCRIPTION
This DTC indicates that "H/Line WE sensor" was installed to a L/Line system incorrectly.

DTC DETECTING CONDITION





COMPONENT INSPECTION
1. Turn ON 'TPMS exciter'.
2. Select "TIRE SNSR CONFIG (EXCITER)" mode.
3. Execute "SET SENSOR STATUS" of Sensor1/Sensor2/Sensor3/Sensor4.
4. Monitor the parameter of Sensor1/Sensor2/Sensor3/Sensor4 on the 'TPMS exciter'.





5. Is parameter within specifications?

YES
> Substitute with a known-good TPMS receiver module and check for proper operation.
> If the problem is corrected, replace TPMS receiver module and then go to "Verification of Vehicle Repair" procedure.

No
> Replace Sensor1/Sensor2/Sensor3/Sensor4 if necessary and register sensor ID with 'TPMS exciter'.
> Go to "Verification of Vehicle Repair" procedure.

VERIFICATION OF VEHICLE REPAIR
Refer to DTC C1121. C1121