DTC 35
Inspection 3: Transmitter - 2MALFUNCTION CODE NO. 35, 36, 37 OR 38
1. CHECK ALL TIRE PRESSURE
^ Check all tire pressures.
Tire pressure: 220 kPa (2.2 kg/m2, 32 psi)
OK >> GO TO 2.
NO >> Adjust tire pressure to specified value.
2. VEHICLE DRIVING
1. Carry out ID registration of all transmitters.
2. Drive at a speed of 40 km/h (25 MPH) or more for several minutes without stopping. Check all tires pressure with CONSULT-II "DATA MONITOR ITEM" within 15 minutes after vehicle speed become 17 km/h (11 MPH).
>> Replace transmitter with new one if "DATA MONITOR ITEM" displayed 64 psi or more. Then GO TO 3.
3. ID REGISTRATION AND VEHICLE DRIVING
^ Carry out ID registration of all transmitters.
^ Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes. Then check all tires pressure with CONSULT-II "DATA MONITOR ITEM" within 5 minutes.
Does "DATA MONITOR ITEM" displayed tire pressure as normal without any warning lamp?
YES >> INSPECTION END.
NO >> GO TO the inspection applicable to DTC.