DTC 52

Inspection 4: Vehicle Speed Signal

MALFUNCTION CODE NO. 52
1. CHECK SELF-DIAGNOSIS RESULTS
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch ON.
2. Select START (NISSAN BASED VHCL).
3. Select BCM on SELECT SYSTEM screen.

NOTE: If BCM is not indicated, go to GI-40, CONSULT-II Data Link Connector (DLC) Circuit. Data Link Connector Schematic

4. Select BCM C/U on SELECT SYSTEM screen.
5. Select SELF-DIAG RESULTS on SELECT DIAG MODE screen.
6. Check display contents in self-diagnostic results.
Is CAN COMM CIRCUIT displayed in the self-diagnosis display items?
YES >> Malfunction in CAN communication system. GO TO LAN-4, Precautions When Using CONSULT-II. Precautions When Using CONSULT-II
NO >> No malfunction. Check combination meter refer to System Description.