Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D"or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to AT-85, "SELF-DIAGNOSTIC RESULT MODE". With Manufacturer's Scan Tool
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH" P0705.
NO >> GO TO 2.
2. CHECK CONTROL CABLE
Check the control cable.
OK or NG
OK >> GO TO 3.
NG >> Adjust control cable.
3. CHECK STARTING SYSTEM
Check the starting system.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.