Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started in "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in P or N position.
^ Engine can be started with selector lever in D or R position.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-92, SELF-DIAGNOSTIC RESULT MODE. Self-Diagnostic Result Mode
Refer to AT-102, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". TCM Self-Diagnostic Procedure (No Tools)
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system.
NO >> GO TO 2.
2. CHECK CONTROL LINKAGE
Check the control linkage.
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage.
3. CHECK STARTING SYSTEM
Check starting system.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.