Active Test

ACTIVE TEST

CAUTION:
- Never perform the active test while driving.
- Active test cannot be started while LDW indicator lamp is illuminated.

1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen. Refer to "CONSULT-II BASIC OPERATION".
2. Touch any field, "BUZZER DRIVE ", "SYSTEM ON LAMP DRIVE" and "INDICATOR LAMP DRIVE", on selection screen.
3. Touch necessary item and "START".
4. Active test screen will be shown.




Active Test Item

BUZZER DRIVE




Touch "ON" and "OFF" to check if LDW chime operates as follows.

"BUZZER DRIVE "
Touch "ON" : LDW chime is activated.
Touch "OFF" : LDW chime is not activated.

SYSTEM ON LAMP DRIVE




Touch "ON" and "OFF" to check if LDW system ON indicator operates as follows.

"SYSTEM ON LAMP DRIVE"
Touch "ON" : LDW system ON indicator illuminates.
Touch "OFF" : LDW system ON indicator turns OFF.

NOTE: Perform "SYSTEM ON LAMP DRIVE" when LDW system ON indicator turns OFF.

INDICATOR LAMP DRIVE




Touch "ON" and "OFF" to check that LDW indicator lamp operates as follows.

"INDICATOR LAMP DRIVE"
Touch "ON" : LDW indicator lamp illuminates.
Touch "OFF" : LDW indicator lamp OFF.