P1715

DTC P1715 INPUT SPEED SENSOR (TURBINE REVOLUTION SENSOR)

Description
ECM receives turbine revolution sensor signal from TCM through CAN communication line. ECM uses this signal for engine control.




CONSULT-II Reference Value in Data Monitor Mode




On Board Diagnosis Logic

NOTE:
- If DTC P1715 is displayed with DTC U1000 or U1001 first perform the trouble diagnosis for DTC U1000, U1001. Refer to EC-155, "DTC U1000, U1001 CAN COMMUNICATION LINE". U1000
- If DTC P1715 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to EC-158, "DTC U1010 CAN COMMUNICATION". U1010
- If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to EC-480, "DTC P0605 ECM". P0605
- If DTC P1715 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335. Refer to EC-360, "DTC P0335 CKP SENSOR (POS)". P0335
- If DTC P1715 is displayed with DTC P0340 or P0345 first perform the trouble diagnosis for DTC P0340 or P0345. Refer to EC-367, "DTC P0340, P0345 CMP SENSOR (PHASE)". P0340




The MIL will not lights up for this self-diagnosis.

Step 1-2:

Diagnostic Procedure