Cannot Be Changed to Manual Mode

Cannot Be Changed to Manual Mode

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE

1. CHECK MANUAL MODE SWITCH
Check the manual mode switch. Refer to AT-155. P1815
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSIS RESULTS

WITH CONSULT-III
^ Perform self-diagnosis.

Without CONSULT-III
^ Perform self-diagnosis. Refer to AT-91, "Diagnosis Procedure without CONSULT-III". Diagnosis Procedure Without Consult-III
Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to AT-84, "CONSULT-III Function (TRANSMISSION)", AT-91, "Diagnosis Procedure without CONSULT-III".
Consult-III Function (Transmission)
Diagnosis Procedure Without Consult-III
NO >> INSPECTION END