In "N" Position, Vehicle Moves
In "N" Position, Vehicle MovesSYMPTOM: Vehicle moves forward or backward when selecting "N" position.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
WITH CONSULT-III
^ Perform self-diagnosis.
Without CONSULT-III
^ Perform self-diagnosis. Refer to AT-91, "Diagnosis Procedure without CONSULT-III". Diagnosis Procedure Without Consult-III
Do the self-diagnostic results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to AT-102. P0705
NO >> GO TO 2.
2. CHECK A/T POSITION
Check the A/T position.
OK or NG
OK >> GO TO 3.
NG >> Adjust A/T position. Refer to AT-207, "Adjustment of A/T Position". Adjustments
3. CHECK A/T FLUID LEVEL
Check A/T fluid level.
OK or NG
OK >> GO TO 4.
NG >> Refill [1][2]ATF.
4. CHECK A/T FLUID CONDITION
1. Remove oil pan.
2. Check A/T fluid condition. Refer to AT-49, "Inspections Before Trouble Diagnosis". Inspections Before Trouble Diagnosis
OK or NG
OK >> GO TO 5.
NG >> Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to AT-59, "Symptom Chart" (Symptom No.67). Symptom Table
5. CHECK SYMPTOM
Check again. Refer to "CHECK AT IDLE".
OK or NG
OK >> INSPECTION END
NG >> GO TO 6.
6. CHECK TCM
1. Check TCM input/output signals. Refer to AT-83, "TCM Input/Output Signal Reference Value". Pinout Values and Diagnostic Parameters
2. If NG, recheck A/T assembly harness connector terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.