C1130

DTC C1130 ENGINE SIGNAL 1

INSPECTION PROCEDURE

1.CHECK SELF-DIAGNOSTIC RESULTS
Check the self-diagnostic results.





Is the above displayed in the self-diagnosis display items?
YES >> GO TO 2.
NO >> INSPECTION END

2.CHECK ENGINE SYSTEM
1. Perform an ECM self-diagnosis and repair or replace malfunctioning items. Perform ECM self-diagnosis again.
2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace malfunctioning items. Perform the self-diagnosis again.