C1160

DTC C1160 DECEL G SEN SET

INSPECTION PROCEDURE

1.CHECK SELF - DIAGNOSTIC RESULTS (1)
Check self-diagnostic results.





Does anything besides "DECEL G SEN SET" appear on self-diagnostic results display?
YES >> Inspect and repair the indicated items. Then perform self-diagnosis again.
NO >> Perform calibration of decel G sensor. Then GO TO 2.

2.CHECK SELF-DIAGNOSIS RESULTS (2)
Turn ignition switch OFF and ON to erase self-diagnostic results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.
Does anything appear on self-diagnostic results display?
YES >> Replace yaw rate/side/decel G sensor. Then perform calibration of decel G sensor and perform self-diagnosis again.
NO >> INSPECTION END