CAN Diagnostic Support Monitor

CAN Diagnostic Support Monitor

OPERATION PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.




3. While pressing the "4" button, turn the volume control dial clockwise or counterclockwise for 30 clicks or more. (When the self-diagnosis mode is started, a short beep will be heard.)
- Shifting from current screen to previous screen is performed by pressing "BACK" button.




4. The initial trouble diagnosis screen will be shown, and items "Self Diagnosis (DCU)", "Self Diagnosis (NAVI)", "Confirmation/Adjustment" and "CAN DIAG SUPPORT MONITOR" will become selective.
5. Select "CAN DIAG SUPPORT MONITOR".




6. The transmitting/receiving of CAN communication can be monitored.