C1144

DTC C1144 ST ANG SEN SIGNAL

INSPECTION PROCEDURE

1.CHECK SELF-DIAGNOSTIC RESULTS (1)
Check self-diagnostic results.





Does anything besides "ST ANG SEN SIGNAL" appear on self-diagnostic results display?
YES >> Inspect and repair the indicated items. Then perform self-diagnosis again.
NO >> Perform adjustment of steering angle sensor neutral position. Then GO TO 2.

2.CHECK SELF DIAGNOSIS RESULTS (2)
Turn ignition switch OFF and ON to erase self-diagnostic results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.
Does anything appear on self-diagnostic results display?
YES >> Replace steering angle sensor. Then perform adjustment of neutral position and perform self-diagnosis again.
NO >> INSPECTION END