Temperature Setting Trimmer

INSPECTION AND ADJUSTMENT


WITHOUT LEFT AND RIGHT VENTILATION TEMPERATURE SEPARATELY CONTROL SYSTEM : Temperature Setting Trimmer


DESCRIPTION
The trimmer compensates for differences in range of �3�C (�6�F) between temperature setting (displayed digitally) and temperature felt by customer.

Operating procedures for this trimmer are as per the following:
1. Begin self-diagnosis STEP-5 mode. .
2. Turn fan control dial clockwise to set system in auxiliary mode.
3. Display shows "61" in auxiliary mechanism. It takes approximately 3 seconds to enable setting operation.
4. Turn temperature control dial as desired. Temperature will change at a rate of 0.5�C (1.0�F) each time a dial is turned.

CAUTION:
A decimal point is not indicated on the display.





When battery cable is disconnected or battery voltage is below 10 V, trimmer operation is canceled. Temperature set becomes that of initial condition, i.e. 0�C (0�F).