Removal and Installation

CONTROL ROD


Removal and Installation


REMOVAL
1. Remove control rod from A/T shift selector assembly. (2WD models), Exploded View (AWD models).
2. Remove manual lever from A/T assembly.
3. Remove control rod from manual lever.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
Apply multi-purpose grease on the pin surface (that slides after installing collar) of the tip of the control rod.
- When installing control rod to A/T shift selector assembly, refer to "ADJUSTMENT". (2WD models), Adjustments (AWD models).