Procedures

WATER PUMP


Inspection


INSPECTION AFTER REMOVAL





- Visually check that there is no significant dirt or rusting on water pump body and vane (A).
- Check there is no slack in vane shaft, and that it turns smoothly when rotated by hand.
- If anything is found, replace water pump.

INSPECTION AFTER INSTALLATION
- Check that the reservoir tank cap is tightened.
- Check for leakage of engine coolant using the radiator cap tester adapter (commercial service tool) and the radiator cap tester (commercial service tool). Inspection.
- Start and warm up the engine. Visually check that there is no leakage of engine coolant.