Luggage Floor Trim

LUGGAGE FLOOR TRIM


Removal and Installation












REMOVAL
1. Remove the 2nd and 3rd row seat belts. Removal and Installation of Second Row Seat Belt and Removal and Installation of Third Row Seat Belt.
2. Remove the third row seat belt buckles.
3. Remove the third row seat assembly. Exploded View.
4. Remove the back door weatherstrip. Removal and Installation.
5. Remove the rear luggage room lamp. Service and Repair.
- Disconnect the harness from lamp.
6. Remove the rear upper finisher. Service and Repair.
7. Remove the rear door kicking plates. Service and Repair.
8. Remove the rear lower finisher.
9. Disconnect the door open/close link. Removal and Installation.
10. Remove the cargo net hooks.
11. Remove the luggage side lower finishers LH/RH.
- Disconnect the power point and the third row seat harness connectors RH side, if equipped.
12. Remove the coat hooks.
13. Remove the luggage side upper finishers LH/RH.
- Disconnect the harness to door open/close switch, LH side.
14. Remove the tie down hooks LH/RH.
15. Remove the floor side finishers LH/RH.
16. Remove the luggage floor board.
17. Remove the storage box.
18. Remove the front luggage floor bracket.
19. Remove the rear luggage box bracket.

INSTALLATION
Installation is in the reverse order of removal.