Diagnosis Procedure

POWER WINDOW MOTOR


REAR RH : Description

Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or rear power window switch RH.




POWER WINDOW MOTOR


REAR RH : Diagnosis Procedure

Regarding Wiring Diagram information, Power Window Main Switch.
1. CHECK REAR POWER WINDOW SWITCH RH OUTPUT SIGNAL





1. Turn ignition switch ON.
2. Check voltage between rear power window switch RH connector
D303 terminals 4, 5 and ground.





Is the inspection result normal?
YES - Replace rear power window switch RH. Rear Power Window Switch.
NO - GO TO 2
2. CHECK REAR POWER WINDOW SWITCH RH CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH and rear power window control unit RH.
3. Check continuity between rear power window switch RH connector D303 terminals 4, 5 and rear power window control unit
RH connector D309 terminals 9, 10.

4 - 9 : Continuity should exist.
5 - 10 : Continuity should exist.

Is the inspection result normal?
YES - GO TO 3
NO - Repair or replace harness.
3. CHECK REAR POWER WINDOW MOTOR RH
Check rear power window motor RH. Component Inspection.
Is the inspection result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - Replace rear power window motor RH. Service and Repair.