Vehicle Security Operation Check

PRE-INSPECTION FOR DIAGNOSTIC


Vehicle Security Operation Check

1.INSPECTION START
Turn ignition switch "OFF".

NOTE:
Before starting operation check, open front windows.
- GO TO 2.
2.CHECK SECURITY INDICATOR LAMP
1. Lock doors using Intelligent Key or mechanical key.
2. Check that security indicator lamp illuminates for 30 seconds.
Does the security indicator lamp illuminate?.
YES - GO TO 3.
NO - Perform diagnosis and repair. Component Function Check.
3.CHECK ALARM FUNCTION
1. After 30 seconds, security indicator lamp will start to blink.
2. Open any door or hood before unlocking with Intelligent Key or mechanical key, or open back door or glass hatch without the presence of Intelligent Key.
Does the alarm function properly?
YES - GO TO 4.
NO - Check the following.
- The vehicle security system does not phase in alarm mode. Vehicle Security System Symptoms.
- Alarm (horn and headlamps) does not operate. Vehicle Security System Symptoms.
4.CHECK ALARM CANCEL OPERATION
Unlock any door using Intelligent Key or mechanical key.
Does the alarm (horn and headlamps) stop?
YES - Inspection End.
NO - Check door lock function. System Description.