Glass Hatch Lock Actuator

GLASS HATCH LOCK ACTUATOR


Diagnosis Procedure

Regarding Wiring Diagram information, Power Door Lock System.
1.CHECK GLASS HATCH LOCK ACTUATOR SIGNAL
1. Turn ignition switch OFF.





2. Check voltage between BCM connector M19 terminal 53 and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - Replace BCM. Service and Repair, "Removal and Installation".
2.CHECK GLASS HATCH LOCK ACTUATOR HARNESS
1. Disconnect BCM and glass hatch lock actuator.





2. Check continuity between BCM connector (A) M19 terminal 53 and glass hatch lock actuator connector (B) D711 terminal 3.





3. Check continuity between BCM connector M19 terminals 53 and ground.






Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace harness.
3.CHECK GLASS HATCH LOCK ACTUATOR GROUND CIRCUIT





Check continuity between glass hatch lock actuator connector D711 terminal 1 and ground.





Is the inspection result normal?
YES - Replace glass hatch lock actuator. Service and Repair.
NO - Repair or replace harness.