Removal and Installation

ENGINE COOLING FAN


Removal and Installation (Crankshaft Driven Type)


REMOVAL
1. Partially drain engine coolant from the radiator. Changing Engine Coolant.
2. Remove the lower and upper radiator shrouds. Exploded View.
3. Remove the drive belt. Removal and Installation.
4. Remove the cooling fan.
5. Remove the fan bracket, if necessary.

INSPECTION AFTER REMOVAL

Fan Coupling





- Inspect fan coupling for oil leakage and bimetal conditions.
- If there are any unusual concerns, replace the fan coupling.

Fan Bracket





- Visually check that there is no significant looseness in the fan bracket shaft, and that it turns smoothly by hand.
- If there are any unusual concerns, replace the fan bracket.

Cooling Fan Pulley
- Inspect cooling fan pulley.
- If there are any unusual concerns, replace the cooling fan pulley.

INSTALLATION
Installation is in the reverse order of removal.
- Install cooling fan with its front mark "F" facing front of engine.

INSPECTION AFTER INSTALLATION
- Check for leaks of the engine coolant. Inspection.
- Start and warm up the engine. Visually make sure that there are no leaks of the engine coolant.