Yaw Rate Sensor: Service and Repair

G SENSOR


Removal and Installation


REMOVAL





1. Remove front center console. Removal and Installation.
2. Remove yaw rate/side/decel G sensor attaching nuts.

CAUTION:
- Do not use power tools to remove or install yaw rate/side/decel G sensor.
- Do not drop or strike the yaw rate/side/decel G sensor.
3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Do not drop or strike the yaw rate/side/decel G sensor.
- After installation, calibrate the yaw rate/side/decel G sensor. Description Special Repair Requirement, "CALIBRATION OF
DECEL G SENSOR : Special Repair Requirement".