Base Audio Without Navigation

INSPECTION AND ADJUSTMENT


CONFIGURATION (AV CONTROL UNIT) : Work Procedure


NOTE:
If "WRITE CONFIGURATION" is unsuccessful, perform "Accessory Number Initialization". For details, Base Audio Without Navigation.
After performing "Accessory Number Initialization", reboot the AV control unit to perform "WRITE CONFIGURATION".
1.WRITING MODE SELECTION
CONSULT-III Configuration
Select "CONFIGURATION" of "MULTI AV".
When writing saved data-GO TO 2.
When writing manually-GO TO 3.
2.PERFORM "WRITE CONFIGURATION-CONFIG FILE"
CONSULT-III Configuration
Perform "WRITE CONFIGURATION-Config file".
- WORK END
3.PERFORM "WRITE CONFIGURATION-MANUAL SELECTION"
CONSULT-III Configuration
Select "WRITE CONFIGURATION-Manual selection" to write vehicle specifications into the AV control unit.
For data to write, Base Audio Without Navigation.
- GO TO 4.
4.OPERATION CHECK
Check that the operation of the AV control unit is normal.
- WORK END